Pluto Trigger is generally connected to your camera via camera cable. But sometimes the camera needs to be placed far away from the Pluto Trigger, such as when using laser mode; in this case, the camera cable is not long enough. The RF Transmitter & Receiver, however, can be used to make a wireless connection between your camera and Pluto Trigger! The transmitter is connected to the camera port of Pluto Trigger, and the receiver is connected to the camera. The RF transmission range extends up to 100 meters.
If you have more than one camera to shoot an event from different angles, you may want to set off every one of those cameras at the same time. This can be accomplished by using the RF Transmitter & Receiver and additional receivers. You can trigger an unlimited number of cameras simultaneously in this way! The synchronization speed reaches up to 1/200 second.
The Receiver can also be used to trigger your speedlight flash or studio flash.
Sony/Minolta cameras and flashes need additional hot shoe adapters to work with the RF transmitter and receiver. The Transmitter and the Receiver each requires 2*AAA batteries. Batteries are not included.
View full product details
$5.00Flash PC sync cable for triggering speedlite flashes. View full product details
Most DSLR and SLR cameras can be triggered remotely using a shutter release cable. Unfortunately, the connectors used for the external release have rather different shapes. We have 13 types of cables to support more than 300 camera models. Refer to the pairing tabs to find out which cable is right for your camera. When you get a new camera, you only need a new camera cable to keep using Pluto Trigger!
Since there is IR remote function designed into Pluto Trigger, you may still be able to trigger your camera even without a camera cable.
If your flash unit does not have a PC sync port, then you will need a Flash Adapter for Pluto Trigger to trigger the flash unit.
The Pluto Valve, together with the Pluto Trigger, enables you to take photos of water drops colliding in mid-air (for splash photography)!
See the Valve Guide to help you get started with using the Pluto Valve.
The battery may not be included in your package due to delivery issues. It is a standard 12V 23A battery. You can find one in most local stores, or on eBay or Amazon.
$10.00The battery replacement kit includes the battery, the housing and screws. We may add a mini screwdriver later. Because there will be some damage to the plastic housing when you unscrew the screws, a new housing is included in the kit. View full product details
The magic arm can be used to hold the Pluto Valve.
Length (Max): approx. 11"/285mm
Height: approx. 2.4"/60mm
Max. Load: up to 2kg
Net Weight: 9.8 oz/277.8g
1 x GkGk 11 INCH Magic Arm
1 x GkGk Super Clamp
Sony to Standard ISO Hot Shoe Adapter:
Standard ISO to Sony Hot Shoe Adapter: